Skip to Content
EMC measuring instruments / Wired immunity / RF Immunity Test Systems

Teseq KEMZ 801 EM Clamp

EM Clamp for testing in accordance with IEC 61000-4-6 for cables for which no CDN exists

The Teseq KEMZ 801 EM Clamp enables fast, standards-compliant EMC immunity testing of cables. It efficiently injects interference signals and ensures reproducible results with minimal testing effort in LF and HF applications.
Technical highlights
  • EM clamp in accordance with IEC/EN 61000-4-6
  • 10 kHz – 1000 MHz, 50 Ω
  • High input power: up to 100 W
User highlights
  • ✓ If a CDN is not an option: Flexible deployment
  • ✓ Reproducibility in accordance with standards
  • ✓ Robust laboratory solution
Applications:
  • Automotive Industry & Railway Technology
  • Telecommunications
  • Testing laboratories and certification bodies
  • Semiconductor and Electronics Development
  • Industrial electronics / Mechanical engineering
Teseq KEMZ 801 EM Clamp

The Teseq KEMZ 801 EM Clamp is a tried-and-tested solution for testing conducted immunity in the low-frequency and high-frequency ranges. It enables electromagnetic disturbances to be coupled directly onto cables and wires without the need for complex contact arrangements.

The operating principle is based on capacitive and inductive coupling, through which interference signals are efficiently transmitted to the lines under test. This enables realistic test conditions and facilitates testing in accordance with current EMC standards.

A key advantage of the Teseq KEMZ 801 EM Clamp is its simple and quick operation. Cables can be tested without interrupting the system. This significantly reduces test times and enables flexible test procedures.

The clamp offers a high degree of reproducibility and ensures stable test conditions. This is crucial for the comparability of measurement results and the validation of products under standardised conditions.


Typical areas of application include:

• EMC immunity tests in accordance with international standards

• Testing cables and wires without direct contact

• Pre-compliance testing during development

• Quality assurance for electronic systems


The robust construction ensures a long service life, even with intensive use in the laboratory. At the same time, the compact design allows for easy integration into existing test set-ups.

The Teseq KEMZ 801 EM Clamp is an efficient solution for fast and precise EMC testing. It helps companies to reliably analyse conducted emissions and validate products in accordance with standards.

Technical properties and features of this product.

Spezifikation Wert
Frequency range 10 kHz – 1,000 MHz
Standard IEC/EN 61000-4-6
Coupling principle inductive / capacitive
Impedance 50 ohms
Max. input power 100 W (0.01–100 MHz) / 100 W (100–230 MHz for short periods) / 50 W (230–1000 MHz)
Connection N-type (female)
Correction factor ±4 dB (typical in the range 0.15–300 MHz)
Max. cable diameter max. 20 mm
Dimensions approx. 647 x 130 x 105 mm
Weight approx. 7 kg

Download the product documents directly or request further documents.

Request further documents
Teseq KEMZ 801 EM Clamp

Related products

Peter Wüthrich

Let us advise you!

Peter Wüthrich · Senior Consultant EMC